Safety

Mowing Risk Management Tips

Municipalities are responsible for maintaining cemeteries, parks and recreation areas, as well as the grounds around municipal buildings. Employees are often mowing, weeding, and maintaining the properties with riding mowers, push lawn mowers, tractors, and weed trimmers. This equipment has the potential to injure operators or bystanders. In addition, objects propelled by the blades or cords of the equipment could also injure bystanders or damage property like headstones in cemeteries, or vehicles parked in a lot or driving by a city maintained median.

Injuries to equipment operators may be reduced with proper use and maintenance of the equipment, coupled with wearing the proper personal protective equipment (PPE). Some injuries associated with the operation of lawn equipment include: cuts and scratches on the lower legs, dust and debris getting into eyes, hand and forearm lacerations, foot injuries and amputations, or back and shoulder strains. Fatalities from falls or rollovers while operating riding mowers are another catastrophic consideration.

Here are some safety tips to consider while using lawn mowers and tractors. Before beginning to mow make sure the area is clear of debris (sticks, rocks, cans, etc.), look for holes or depressions, and identify and mark any large semi-buried rocks or stumps that could damage the mower or cause a rollover. Do not mow while people or animals are in the mowing area. If anyone enters the mowing area while you are mowing stop and shutdown the blade until they pass and are safely out of reach of a flying projectile (about 50 feet). Mow in dry conditions only, not only can wet grass clog the mower, but wet conditions can cause the ground to become unstable causing the mower to slip and slide. Plan to mow during the day. Never mow at night when visibility is limited. Check the weather forecast - never mow during a thunderstorm. Make sure the grass deflectors, blade covers, and other safety guards are in place. If the mower or tractor has a ROPS (rollover protective system) make sure it is in the “up” position and locked in place. Never operate mowers when sleepy or ill.

Match the slope to the mower. If slopes are too steep to mow with a riding mower, use a push mower. With riding mowers, mow up and down a slope – preferably only mowing down the slope and driving (without mowing) back up the slope. When push mowing a slope, mow horizontally across the slope. This will help prevent the operator’s feet from sliding under the blades if the mower or operator slips. Rear engine mowers are fairly unstable and are not recommended to use on slopes, even vertically, due to tip and rollover hazards.

While mowing, do not allow children near the work area, since any kind of accident can occur if the operator is unaware and does not see those who might be attracted by the machine and mowing activity. Never assume children will remain where they were last seen. Keep an eye out for delivery trucks and other vehicles when crossing parking lots and driveways. Arrange the mowing path to avoid propelling objects toward people, vehicles, or buildings with windows. Keep the discharge chute opening lowered at all times and be sure the area is clear of people and pets before operating. If someone approaches your mowing area, stop the blade until they are safely passed. If they approach you on the mower, stop the blade and turn the mower off. Never carry any passengers on the mower or tractor; it is “operator only” aboard the equipment.

Push mowers are designed to be pushed forward. Pulling them backwards increases the risk of accidental contact with the blade. Occasionally, there may be a need to pull the mower backwards while maneuvering, but otherwise try not to mow pulling backwards. On riding mowers and tractors try not to mow in reverse unless absolutely necessary and look in the direction you are traveling if mowing in reverse. Never put your hands or feet into the mower to remove grass or debris. Even with the motor turned off, the blade remains engaged. Use a stick or broom handle to remove obstructions (not your hands). If using a bagger, stop the blade before emptying the bag. Stop the engine before reaching into the discharge chute. Keep movements on slopes slow and gradual. Do not make sudden changes in speed or direction, which could cause a tip or rollover. Do not mow near drop-offs, ditches, or embankments. The mower could suddenly rollover if the wheel goes over the edge or if it caves in. Tall grass can hide objects, holes, or bumps. Go slowly and use caution when mowing through areas where there may be tree stumps or semi-buried rocks hidden by tall grass. If the mower strikes an object, stop, turn off the engine and inspect the mower and blade for damage. If damaged, do not use it until it is repaired. Turn off the blade and wait for it to stop before crossing gravel paths, roads, alleys, or trails. Always stop the blade before removing the grass catcher or unclogging the discharge chute. Before refueling, always allow the engine to cool down a few minutes and never smoke while refueling. Do not run a gasoline or diesel engine indoors without proper ventilation. Shut off the engine and remove the key before leaving the mower unattended, even briefly. When working on the mower, remove the sparkplug wire to prevent an accidental startup. It is especially important while removing the blade – turning the blade bolt with a wrench can turn the blade drive shaft and crank the engine, causing the mower to start. Wear personal protective equipment including work boots, long pants, a long-sleeved shirt, hearing protection, and shatterproof safety glasses or goggles.

Taking these precautions can greatly improve your risk management during mowing season. Fewer windows will be broken, vehicles dented, headstones marred, and people injured if we just take the time to “think safe”.

Print Friendly and PDF

Weed Trimmer Safety Tips

Weeds have a tendency to sprout alongside walkways, buildings, and cemetery headstones on municipal grounds. Few lawn mowers can safely get into these edges and corners as needed to cut weeds and tall grass. A weed trimmer is the best way to reach these spots. Consider the following safety tips for using weed trimmers.

Prepare the site – walk the area to be trimmed prior to starting. Remove debris, sticks, stones, and other obstacles or potential hazards. Make sure there are no people or pets in the area and stay alert to anyone or anything entering your workspace while trimming. Prepare the weed trimmer by checking the safety guards and shields, making sure they are in place. Verify there is enough nylon line in the spool. Fill the fuel tank and always allow the engine to cool down before refueling.

When trimming, keep in mind that lawn trimmers can throw objects at high speeds, so avoid working near people, vehicles, and delicate building structures. Never attempt to adjust or repair a weed trimmer while the engine is running. Keep the line short so it does not extend past the guard on the head of the weed trimmer. Keep one hand on the handle and one hand on the shaft of the trimmer to provide greater control. If provided, use a shoulder strap for support to help with weight and vibration of the weed trimmer. This can help prevent back, shoulder, and arm fatigue or strains. When trimming, keep the throttle at full speed, but be able to maintain control of the trimmer. Swing the trimmer in a slow smooth arcing motion. Move the trimmer forward and step forward to cover more ground. Don’t over extend the trimmer with just your arms or bending forward, as this could cause excess fatigue.

Watch for hidden obstacles like wires, fence posts, rocks, or bricks that could cause the trimmer to bounce backwards or entangle the line and jam the trimmer. This could cause injury to the operator or damage the equipment. Wear work boots, hearing protection, eye and face protection, long pants and long-sleeved shirts to protect your body.

Working outside, other personnel safety precautions include dealing with weather and natural conditions. Consider the following additional safety tips while using weed trimmers. If you are working near a street or roadway, wear a reflective vest. Be aware of nearby traffic and parked vehicles and position yourself so you won’t accidentally throw objects into traffic or vehicles. Don’t listen to music with headphones, as it can be a distraction and add to noise exposure. Use sun block and wear a hat to protect from sun exposure. Use an insect repellant with at least 10% DEET to protect from mosquito and tick bites. Stay hydrated, drinking about 8 ounces of water every 20 minutes. Be able to identify and avoid poisonous plants like poison ivy, poison sumac, and nettles. Watch out for venomous spiders, caterpillars, and snakes. Keep a first-aid kit handy and include EpiPens and a snakebite kit in the kit.

The key to safe operation of weed trimmers varies; select the proper type of weed trimmer for the job. Make sure operators are properly trained to use the equipment. Survey the work area and identify or remove obstacles and hazards. Don’t work around people or pets. Inspect and maintain your equipment frequently and follow the manufacturer’s maintenance and safety instructions. Wear the appropriate personal protective equipment (PPE). Compliance with these safety considerations can help better protect workers, citizens, and the municipality from injury, property damage, and tort claims.

Print Friendly and PDF

Risk & Safety News: Emergency Response Issue

Print Friendly and PDF

Emergency Action Plan Basics

The following are basic things to be prepared for and do in specific emergency situations:

Wildfires:

  • Wildfires can occur anytime or anywhere, but the potential is always higher during periods with little to no rainfall; high winds can contribute to escalating wildfire risks
  • Make a wildfire plan – know where to go and which evacuation routes to use to get there
  • Make or restock your emergency preparedness kit; include flashlight, batteries, cash, first-aid supplies, food, and water
  • Stay tuned to alerts via phone, radio, or television for updates, emergency instructions, or evacuation orders

Prepare before a wildfire

  • Keep a clear area approximately 30 feet away from buildings. Clear away anything that will burn like wood, leaves, brush, and other landscaping
  • Create fire breaks such as driveways, walkways, and tree/bush free lawns
  • Regularly clean roofs and gutters of combustible debris
  • Connect a garden hose long enough to reach any area around the building and fill large containers with water
  • Review your insurance policy and prepare or update building contents

During a wildfire

  • Be prepared to evacuate on short notice
  • If you see a wildfire and haven’t received any alerts or evacuation orders, call 9-1-1 and report it; don’t assume someone else has already called it in
  • If ordered to evacuate, do it immediately and make sure to notify someone where you are going and when you arrive
  • If you or someone has been burned, call 9-1-1 or seek help immediately; keep the burned area cool and covered to reduce the chance of infection or further injury

After a wildfire

  • Return to facilities only when authorities say it is safe
  • Maintain a fire-watch for several hours checking for smoke, sparks, or hidden embers that may reignite
  • Use caution when going through burned areas; hazards may still exist including hot spots and potential gas leaks or electric lines
  • During cleanup wear a NIOSH certified respirator (dust mask) and wet debris down to minimize breathing ash particles
  • Discard any food that has been exposed to heat, smoke, or soot
  • Do not use water that may have been contaminated to wash dishes, brush teeth, prepare food, wash hands, or make ice
  • Photograph damage for insurance purposes

Tornadoes:

Oklahoma has one of the highest number of tornadoes in the U.S. and they can occur anytime during the year.

Preparing for a tornado

  • Identify safe rooms, storm shelters, or other potential protection locations where you can go quickly for safety when there is a warning or approaching tornado
  • Have an emergency kit handy with flashlight and batteries, water, snacks, blankets, weather radio, and first-aid kit
  • Be alert to changing weather conditions; Look for approaching storms; look for danger signs:
    •            Dark, often greenish sky
    •            Large hail
    •            Large, dark, low hanging clouds (particularly if they appear to rotate)
    •            Loud roaring noise
    •            Flying debris in the air

Know the terms:

Tornado Watch – conditions warrant the possibility that tornados could occur

Tornado Warning – a tornado has been sighted or indicated by weather radar. Take shelter immediately

After a tornado

  • If you are trapped, do not move about or attempt to move objects; tap on a pipe or the wall to help rescuers locate you
  • Listen for updates and instructions from local officials
  • Check in with family or friends via texting or social media
  • Watch out for sharp dangerous debris and downed power lines or gas leaks
  • Stay out of damaged buildings until authorities deem them safe
  • Wear protective clothing, dust masks, and gloves during clean up; don’t attempt to move heavy debris by yourself
  • Do what you can to prevent further damage to property (putting up tarps, etc.) since insurance may not cover additional damage that occurs after the storm
  • If the building is without power use flashlights or battery powered lanterns rather than candles or fuel lanterns
  • Take photos of damaged property; keep a list of property in buildings in a safe location like the cloud

Floods

Flooding can occur in Oklahoma during every season, but spring holds our biggest threat. It is particularly important to be prepared for flooding in low-lying areas near rivers, creeks, and lakes.

Basic Flooding Safety Tips:

  • If you approach flooding streets when driving; Turn Around, Don’t Drown! Avoid walking or driving in floodwaters
  • Don’t drive over bridges that have fast moving water. Floodwaters can scour foundation material from around the footings and make the bridges unstable
  • Just 6 inches of moving water can knock you down and sweep you away; 1 foot of moving water can wash your vehicle away
  • If there is a chance of flash flooding, move immediately to higher ground
  • If floodwaters rise around your vehicle but the water is not moving, abandon your vehicle and get to higher ground.  Do not leave the vehicle if the water is moving
  • Avoid parking along creeks and rivers during heavy rains. They can flood quickly with little warning

Terms to know:

Flood Watch = Be Aware, conditions are right for flooding or flash flooding in your area

Flood Warning = Take Action, flooding is either happening or will shortly

Preparedness:

  • Turn on the TV or radio to receive the latest updates on weather and emergency instructions
  • Know where to go in case you need to seek higher ground in a hurry
  • Make or restock an emergency kit. Include: flashlight, batteries, first-aid supplies, dry clothing and blankets, water, and snacks

After a flood:

  • Return only when authorities say it is safe
  • Be aware of areas where floodwaters have receded; watch out for debris. Floodwaters often erode roads, walkways, and foundations of buildings
  • Do not attempt to drive through areas that are still flooded
  • Avoid standing water as it may be electrically charged from underground or downed utility lines
  • Photograph damaged property for insurance purposes

Earthquakes:

Earthquakes are unexpected, sudden, rapid shaking of the earth caused by breaking and shifting subterranean rock. After the quake aftershocks may occur causing further damage.

Preparing before an earthquake:

  • Secure items that could fall or move and cause injuries or damage (bookshelves, mirrors, light fixtures, etc.)
  • Practice how to “Drop, Cover, Seek Shelter and Hold On” drop to the ground, cover your head and neck, crawl to a place where you can be protected (under a table) and hold on
  • Properly store documents. Keep water and first-aid supplies on hand as well as food, clothing, blankets, flashlight and batteries
  • Plan where to go, should an earthquake occur, and have an alternative way to communicate with your family

During an earthquake:

  • Drop, Cover, Seek Shelter and Hold On
  • Stay where you are until the shaking stops. Don’t run outside. Do not get in a doorway as this does not provide protection. Be very careful, move slowly and test your footing as you move into an open area
  • If you are outside when the shaking starts, move away from buildings, streetlights, and utility wires. Drop, Cover, Seek Shelter and Hold On until the shaking stops

After the earthquake:

  • When the shaking stops, look around. If the building is damaged and there is a clear path to safety, leave the building and go to an open space away from damaged areas
  • If you are trapped, do not move about or kick up dust
  • If you have a cell phone use it to call or text for help
  • Tap on a pipe or wall to draw the attention of rescuers
  • Once in the clear, if you are not injured, provide assistance to those in need however you can
  • Use extreme caution during post-disaster cleanup. Wear protective clothing, work gloves, and sturdy boots
  • Be prepared for aftershocks. Drop, Cover, Seek Shelter and Hold-on

Active Shooter:

Don’t think terrorism, bomb threats, and active shooter incidents only happen in big cities. They can occur anywhere and anytime. Have a plan in place and train your employees on what to do if confronted with an active shooter.

Planning:

  • Train employees to be aware of their surroundings and to observe what is going on with people (their demeanor, remarks, body language) that makes them uncomfortable and ill-at-ease. Report suspicious behavior to authorities
  • Identify the two nearest exits anywhere you go, and have an escape path in mind or find good places to hide
  • Understand how you would provide for individuals with disabilities or other access and functional needs

During an Active Shooter incident: 3 Options - Run, Hide, Fight

  • Run - escape if possible; getting away from the shooter(s) is the top priority
  • Leave your belongings and get away
  • Help others escape, if possible, but evacuate regardless of whether others agree to follow
  • Warn and prevent individuals from entering an area where an active shooter may be
  • Call 9-1-1 once you get safe, and describe the shooter(s), location, and weapons
  • Hide - get out of the shooter’s view and stay quiet. Lock and block doors, close blinds, turn off lights, turn off your cell phone’s ring and vibrate options
  • Don’t hide in groups.  Instead, spread out along walls or hide separately; don’t make it easy for the shooter
  • Try to communicate with police silently through text messaging or social media, or put a sign in a window
  • Stay in place until law enforcement gives you an all clear or comes for you
  • Make sure your hiding place provides you with protection if shots are fired through the door or walls
  • Fight - as an absolute last resort. Commit to your actions, be as aggressive as possible against the shooter(s)
  • Recruit others to ambush the shooter using makeshift weapons (chairs, flagpoles, fire extinguishers, scissors, whatever you can find as a weapon)
  • Be prepared to cause severe or lethal injury to the shooter

After the Active Shooter incident:

  • Keep hands visible and empty; know that law enforcement’s first task is to end the threat; they may have to pass the injured along the way until they have secured the area
  • Follow law enforcement instructions and evacuate in the direction they come from
  • Officers will be armed with rifles, shotguns, and handguns; they may use pepper spray or tear gas to control a situation
  • Officers will shout commands and may push individuals to the ground for their safety
  • Consider seeking professional counseling for you and your family to cope with long-term effects of the trauma
  • Take care of yourself first, then you may be able to help the wounded before first responders arrive
  • While waiting for first responders, provide first-aid, apply direct pressure to wounds and use tourniquets if you are trained to do so
  • Place wounded people on their sides if they are unconscious and keep them warm

Many municipal law enforcement departments are providing training for staff and citizens concerning “Active Shooter” incidents. For more information contact your local police department to find out how a training may be arranged.

AdobeStock_71215781.jpeg
Print Friendly and PDF

Emergency Planning & Preparedness

The Occupational Health & Safety Administration (OSHA), Federal Emergency Management Agency (FEMA), and National Safety Council all provide valuable resources for safety professionals who are seeking to create effective and comprehensive emergency plans for their municipalities.

Emergency situations include natural disasters such as floods, tornadoes, wildfires, and earthquakes, as well as man-made crises like toxic gas releases, chemical spills, bomb threats, and workplace violence situations. Plans to address these scenarios should include provisions for:

Print Friendly and PDF

Why Backing into Parking Spaces is a Good Risk Management Practice

Why Backing into Parking Spaces is a Good Risk Management Practice

For some time, there has been a debate whether it is safer to back into a parking space in the workplace. I believe it is a good risk management practice. Let me tell you why.

Roughly one in seven vehicle incidents occurs in parking lots. Therefore, it is a good area to focus on to reduce accidents. How employees park when they arrive at work can affect their day-to-day safety behavior. Let’s look at how backing into a parking space might make a person more safety conscious.

Print Friendly and PDF

Five First-Aid Tips & Tricks

  1. Direct Pressure Stops Bleeding – Serious bleeding from a major blood vessel or artery is a life-threatening emergency. The best way to stop severe bleeding is to apply firm, direct pressure directly over the bleeding wound.

  2. Anyone Can Use A Defibrillator – Automated External Defibrillators (AEDs) deliver an electrical shock to help victims of sudden cardiac arrest. A cardiac arrest occurs when the heart stops beating due to a problem with electrical activity. Public buildings should have an AED station on hand, mounted in plain sight and marked with a sign. An AED is designed to be used by anyone. They are fully automated and have voice prompts to guide the user through the steps. Providing employees with an annual training on the use of an AED could save lives.

  3. Nosebleeds – Tilt the head forward, not back! The best way to stop a nosebleed is to pinch the soft part of the nose for a minimum of 10 minutes while having the person lean forward.

  4. Water for Burns – Cooling a burn quickly is vital to prevent further damage to tissue. The best way to cool a burn is running water. Putting anything else on a burn (such as butter or toothpaste, etc.) will not be as effective at removing heat and stopping the burning process.

  5. Chest Compression Rule – The most important component of CPR is high quality chest compressions. If you are unable or unwilling to do rescue breathing, then don’t. Instead do continuous chest compressions until medical help arrives.

Print Friendly and PDF

March 2018 Risk & Safety Newsletter

Print Friendly and PDF

Vehicle Backing Safety

One out of every four vehicle accidents can be blamed on poor backing skills, according to the National Safety Council. Approximately 500 people die and 15,000 are injured due to backing accidents each year. Using safe vehicle backing tips can help prevent you or your employees from experiencing the trauma and expense of a backing accident.

  • Think ahead. Drivers should not put themselves in an unnecessary backing situation.

  • Park defensively. Drivers choose an easy-exit parking space, like pull-through or where no one else is parked. Don’t crowd neighboring vehicles; be sure to park your vehicle in the middle of your space.

  • Know your vehicle’s blind spots. Drivers need to remember that mirrors never give the whole picture while backing. In a medium-sized truck, blind spots can extend up to 16 feet in front and 160 feet behind the vehicle.

  • Do a walk-around. Before entering your vehicle do a walk-around. This gives you a firsthand view of the backing area and any limitations. You can check for children, signs, poles, drop-offs, buildings, and other things you might hit if not attentive in your backing.

  • Know your clearances. While performing your walk-around also check for obstructions, low hanging eaves and tree limbs, wires, and any other potential clearance-related obstacles.

  • Alley parking is a special circumstance. If an alley doesn’t permit driving all the way through or room to turn around, you should back into it (if ordinances permit) so when leaving you can pull forward into the street rather than backing blindly out into the street.

  • Use a spotter. Have another person help when backing. The driver and spotter should use hand signals instead of verbal instructions. This may take some practice so that you understand each other’s signals. Do not allow the spotter to be positioned directly behind your vehicle or walk backwards behind you while giving instructions. They should be off to the driver’s side where you can see them in your side mirror.

  • Every backing situation is new and different. Sometimes a driver visits the same location several times a day. The driver should be watchful each visit for changes and new obstacles (new vehicles, trash cans, people, etc.)

  • Drivers sometimes must spot for themselves. They need to return to the vehicle and start backing within a few seconds after finishing their walk-around. This will allow very little time for people, cars, or other obstacles to change the backup conditions. Backing without a spotter should only take place after the driver has learned as much as possible about the area they are backing into.

Long-Term Solutions to Safe Backing:

  • Install rear-vision camera systems in vehicles to eliminate rear blind spots. Investing in a rear-vision camera system for vehicles can put drivers in full visual control of the rear of a vehicle.

  • No amount of forward-driving experience can help a driver with backing a truck or other vehicles. All drivers need practice, practice, practice in safe surroundings until they become familiar with the way the vehicle backs up compared to the direction the steering wheel is turned. Supervisors need to test and approve drivers’ skills before allowing them on the streets.

  • Create and support a company-wide training program. The program should include a driver’s course to teach and review backing techniques, as well as covering equipment usage, hand signals, dangers to avoid, and other risk-lowering topics. OMAG has partnered with OSU/OKC’s Precision Driving School to provide training to municipal drivers free of charge. Contact OMAG Risk Management Services to get more details on how to sign up.

With so many potential injuries, loss of property and vehicular liability claims isn’t it worth it to take some time to evaluate your vehicle backing skill?

Print Friendly and PDF

Twelve Rules for Safe Handling of Hazardous Materials

Twelve Rules for Safe Handling of Hazardous Materials

Do your employees know how to handle hazardous materials safely? Do you have written policies and procedures for handling hazardous materials and are your employees trained on those procedures? Here are 12 basic rules all employees who handle or work around hazardous materials should know and follow:

1.      Follow all established procedures and perform job duties as you have been trained.

2.      Be cautious and plan ahead. Think about what could go wrong and pay close attention to what you are doing while working with or around hazardous materials.

3.      Always use required PPE; inspect it carefully before each use to make sure it’s safe to use. Replace worn PPE; it won’t provide adequate protection.

4.      Make sure all containers are properly labeled and that materials are contained in an appropriate container. Don’t use any chemical not contained or labeled properly. Report damaged containers or illegible labels to your supervisor immediately.

5.      Read labels and the Safety Data Sheets (SDSs) before using any material to make sure you understand hazards and precautions.

6.      Use all materials solely for their intended purpose. Don’t, for example, use solvents to wash your hands, or gasoline to clean equipment.

7.      Never eat or drink while handling hazardous material. If your hands are contaminated, don’t use cosmetics or handle contact lenses.

8.      Employees handling hazardous materials need to read labels on chemicals they use or handle and have Safety Data Sheets (SDSs) available to refer to that explain how to properly deal with handling, storing, and cleaning up spills, and that explain relevant first-aid procedures.

9.      Store all hazardous materials properly, separate incompatibles, and store in ventilated, dry, cool areas.

10.  Employees must keep themselves and the work area clean. After handling any hazardous material, wash thoroughly with soap and water. Clean work surfaces at least once per shift, so contamination risks are minimized.

11.  Learn about emergency procedures and equipment. Understanding emergency procedures means knowing evacuation procedures, emergency reporting procedures, and how to deal with fires or spills/leaks. It also means knowing what to do in a medical emergency if a co-worker is injured or overcome by chemicals.

12.  Keep emergency eyewash and shower stations clean. Test them at least monthly to make sure they are working properly and keep them accessible; don’t let clutter build up around the stations.

Your department may have other safety rules and concerns.  Present this list in a safety meeting and get your employees involved in adding to the list. This will create a sense of ownership over your safe chemical handling procedures. To the employees it will be “our procedures” rather than “their procedures” which were just given to them. If employees recognize the risks and have involvement in providing input, they will be more likely to comply with your policies and procedures.

Print Friendly and PDF